GENERAL PURPOSE EPOXY SYSTEMS

ER/EH Series Resins and Hardener
Resins (ER)
ER-2 is a low cost single phase resin system that is designed for applications where structural performance is not required above 120F. ER-2 resin system works well on fiberglass, carbon, and Kevlar reinforcements.
ER-3 is a high performance single phase resin system that is designed for applications where high modulus and low viscosity are important. ER-3 resin system works well on all fiberglass, carbon, and Kevlar reinforcements.
ER-4 is a higher performance version of ER-3.
ER-10 is a single phase resin system that is designed for applications where high modulus and low cost are important. ER-10 resin system works well on all fiberglass, carbon, and Kevlar reinforcements.

Data Sheets: ER-2 / ER-3 / ER-4 / ER-10

Hardeners
EH-101 is the fastest cure hardener (15 min. pot life) and is excellent for joining and fairing. Cures well at low temperatures.
EH-102 is designed for laminating moderately large components which need very good overnight room temperature cure and 2-3 hours working time. Parts can be de-molded after 12 hours at 77 F without the typical epoxy brittle phase.
EH-103 is a long potlife (200 min) hardener which sets overnight, but requires 120 F post cure to eliminate brittle phase in cure. Excellent hardener for large boating projects which may require 8 hours of working time.
EH-104 is the slowest hardener and has low skin irritation and is recommended for individuals whom are sensitive to epoxy resin hardeners, and large projects that require up to 12 hours of working time. Parts will set hard after 48 hours, but require additional heat at 160 F for 4 hours to complete the cure. Hardener is not recommended for cures below 160 F.


Property Summary and Application Guide for the ER-2, 3 & 4 of the ER Epoxy Systems
Resin /
Hardener
Combination		 Mix Ratio:
Volume		 Viscosity
Mixed		 Pot life
150gms
at 77F		 Thin film
working time
at 77F		 Working cure
----------------
Recommended
post cure.		 Applications
ER-2 / EH-101 4:1 1000 cps 20 min 1 hour 4-6 hours at 70F*
----------------
7 days at 70F or
2 hours at 160F		 Fast curing general purpose system. Gluing, filling and fairing, coating and sheathing.
*Working cure can be reduced with added heat.
ER-2 / EH-102 4:1 800 cps 1 hour 3 hours 16 hours at 70F
----------------
3 hours at 160F		 Long open time general purpose system. Gluing, filling and fairing, coating and sheathing.
ER-3 / EH-102 4:1 1100 cps 1 hour 3 hours 16 hours at 70F
----------------
3 hours at 160F		 Structural laminating system with long open time with over night Room Temp working cure.
ER-3 / EH-103 4:1 1000 cps 3 hours 8 hours 4 hours at 120F
----------------
4 hours at 170F		 Structural laminating system for applications that require very long open time. Added heat is required for a working and full cure.
ER-4 / EH-102 4:1 800 cps 1 hours 3 hours 16 hours at 70F
----------------
3 hours at 160F		 A low viscosity, higher performance and cost version of ER-3 / EH-102. A good choice for use with carbon fiber.
ER-4 / EH-103 4:1 700 cps 3 hours 8 hours 4 hours at 120F
----------------
4 hours at 170F		 A low viscosity, higher performance and cost version of ER-3 / EH-103. A good choice for use with carbon fiber. Added heat is required for a working and full cure.
ER-4 / EH-104 4:1 1200 cps 4 hours 12 hours 2 hours at 140F
----------------
2 hours at 180F		 For the production of large components. Low skin irritation potential which is a consideration for on going production applications. Added heat is required for a working and full cure.

Other product data and safety sheets are available on request.



Epoxy Pricing
Pricing per pound for ER & DR epoxy resins
Product Drum (480 lbs)
$ per lb		 5 Gal Pail (42 lbs)
$ per lb		 1 Gal Ctnr (8-10 lbs)
$ per lb
ER-2 3.96 4.75 5.93
ER-3 4.10 4.85 6.00
ER-4 4.85 6.00 7.15
DR-5 4.50 5.60 6.90
DR-7 4.05 4.80 6.25
DR-ADTX Call (400 lbs) 6.00 (35 lbs) 7.20 (7 lbs)
Pricing per pound for EH hardeners
Product 15 Gal Ctnr (110 lbs)
$ per lb		 5 Gal (40 lbs)
$ per lb		 1 Gal Ctnr (8-10lbs)
$ per lb		 1 Qt Ctnr (2 lbs)
$ per lb
EH-101 4.80 5.30 6.00 8.00
EH-102 5.25 5.70 6.50 8.00
EH-103 5.14 6.31 7.63 9.33
DH-AD 4.20 (176 lbs) 6.30 (17 lbs) 6.30 (3.1 lbs)

May 2009. Prices Subject To Change Without Notice.